Product ID:CADWELD ELECTRICAL WELDING MATERIAL
MSDS Date:03/20/1991
FSC:3439
NIIN:00-819-4000
MSDS Number: BWLDG

ERICO PRODUCTS INC

34600 SOLON RD
CLEVELAND, OH 44139-2631
US

Emergency Phone: 216-248-0100

Info Phone: 216-248-0100 / FAX 216-248-0723

Cage: 14045

ERICO PRODUCTS INC

SOLON, OH 44139-2631 US

Telephone: 216-248-0100

Cage: 14045

COPPER OXIDE

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: >50%

ACGIH TLV: 1 MG(CU)/M3

ALUMINUM/COPPER ALLOY

CAS: 12608-74-1

Fraction By Weight: >10%

FLUORSPAR

CAS: 14542-23-5

Fraction By Weight: <5%

CALCIUM-SILICON ALLOY

CAS: 37236-74-1

Fraction By Weight: <5%

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: <10%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9495

ALUMINUM VANADIUM ALLOY

CAS: 39548-13-4

Fraction By Weight: <5%

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <10%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2 MG/M3 FUME; 9495

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:ACGIH TLV FOR NUISSANCE DUST IS 10MG/M3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES-RADIATION CAN CAUSE TEMPORARY
BLINDNESS.SKIN-MAY CAUSE IRRITATION OR BURNS.INHAL-DUST OR FUMES
MAY CAUSE REPIRATORY IRRITATION(METAL FUME FEVER).INGEST-UNLIKELY
ROUTE OF EXPOSURE. CHRONIC-COPPER OXIDE DUST MAY CAUSE ULCERATIONS
IN THENASAL SEPTUM. FLUORIDES MAY CAUSE FLUOROSIS(TOOTH AND BONE
DAMAGE).
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:SKIN:ALLERGIC DERMATITIS.INHALED:METAL FUME
FEVER HAS FLU-LIKE SYMPTOMS(HEADACHE,FEVER,CHILLS).
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING
RESPIRATORY AILMENTS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid:SKIN-TREAT FOR BURNS.EYES-FLUSH WITH WATER FOR 15
MINUTES.INHALED-REMOVE TO FRESH AIR.GIVE OXYGEN OR ARTIFICIAL
RESPIRATION IF NEEDED.INGEST-UNLIKELY TO BE NEEDED.

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:1750F
Extinguishing Media:DRY SAND OR FLOOD WITH WATER.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:SELF PROPAGATING HIGH TEMPERATURE
REACTION WILL OCCUR IF HEATED ABOVE 1750F. CREATES MOLTEN METAL,
SLAG AND DENSE, DUSTY SMOKE.

Spill Release Procedures:VENTILATE AREA.USE PROPER PROTECTIVE AND
RESPIRATORY EQUIPMENT.SCOOP UP OR VACUUM WITH
NON-SPARKING/NON-CONDUCTIVE EQUIPMENT;DO NOT CREATE DUST;PLACE IN A
DRY CONTAINER FOR DISPOSAL.
Neutralizing Agent:NOT APPLICABLE.

Handling and Storage Precautions:STORE IN A COOL,DRY,WELL-VENTILATED
PLACE. KEEP CONTAINER CLOSED WHEN NOT IN USE.KEEP AWAY FROM
HEAT,SPARKS,FLAMES AND INCOMPATIBLE MATERIALS
Other Precautions:AVOID MOISTURE.DO NOT SMOKE IN THE WORK AREA.

Respiratory Protection:NOT NEEDED IN NORMAL SERVICE.
Ventilation:USE LOCAL EXHAUST.
Protective Gloves:WORK GLOVES
Eye Protection:SAFETY GLASSES WITH WELDER'S LENS
Other Protective Equipment:PROTECTIVE CLOTHING,AS NEEDED.PROVIDE A
LOCAL EYE WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS.SEPERATE WORK CLOTHES FROM STREET
CLOTHES.LAUNDER WORK CLOTHES BEFORE REUSE.KEEP FOOD OUT OF THE WORK
AREA.
Supplemental Safety and Health
TO CHOOSE THE PROPER WELDING LENS,FIRST CHOOSE THE LENS WHICH BLOCKS
OUT THE RAYS;THEN USE THE NEXT LOWEST FILTER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2000F,1093C
Spec Gravity:5.5
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY-BLACK GRANULAR PERTICLES; ODORLESS.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
MOISTURE(THE PRODUCT WILL REACT VIOLENTLY IF MOISTURE IS IN THE MOLDS
OR BASE METAL BEING WELDED AT THE TIME OF USE.
Stability Condition to Avoid:TEMPERATURES ABOVE 1750F.
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.